This is the second cast taken , the first from the silicone rubber mould before anything has been done to it. The edges will need to be surformed to remove the excess plaster and the line where the two halfs of the mould meet or the seam line will need to be removed with great care.
There is a cavity in the plaster by the hip which will need filling and also the extra plaster by the waist, neck and arms will need to be removed.
The screw holes in the centre wall can be seen.
The plaster will now dry out for two weeks before the process of patinating can begin.
Ash Glazing... - It's been a while since I did some new Ash Glaze tests and with a break in regular making, SALA seemed like as good a time as any. So with a gas firing p...
1 month ago